Don’t let your home become a statistic. Heavy snowfall has caused thousands of roofs to collapse due to the extreme weight. If your area experiences any amount of snow, consider using these strategies to prevent snow buildup from damaging your roof. Find out how professional snow removal can keep your roof intact through even the worst winter storms.

How Much Can Your Roof Support?

It’s important to understand how much snow and ice your roof can safely support. Homes around the country are all built with their climate in mind, so the exact amount can vary dramatically. It’s best to have a local roofing contractor inspect your roof to determine your roof’s weight threshold. Once that’s done, you’ll have a better idea when your roof is reaching dangerous accumulation.

Ice Prevention

Snow weighs less than ice, so ice buildup can be an even greater threat. Roofs that accumulate a lot of ice may be improperly insulated or vented. When this happens, your roof traps warm air from your home. This air heats the snow enough to melt it, which is quickly cooled again to form ice. Roofing contractors can help you determine any hotspots in your roof, and then quickly install vents or additional insulation to prevent ice buildup before it happens.

Snow removal

Once snow has already accumulated near dangerous levels, you’ll want a professional to have it removed. Using a snow rake, the snow and ice is pushed off your roof to reduce the weight and risk of collapse.

The technique seems simple enough, but is surprisingly dangerous. Large amounts of snow and ice can easily become dislodged at once, leaving individuals on the roof vulnerable to slipping and individuals on the ground at risk of falling piles of ice and snow. The best protection is hiring an expert who has experience removing snow safely. Contact a local roofing contractor today to keep your roof safe and intact.

Choosing the perfect siding for your home can feel overwhelming. It’s difficult to balance price, quality and durability while comparing and contrasting each type. If you’re looking for a balanced, yet affordable siding that helps insulate your home, consider choosing insulated vinyl siding. Here are a few great reasons why this material is a popular option.

Energy Efficiency

Standard vinyl siding is made from PVC, or polyvinyl chloride. This material is durable, paintable and affordable, which makes it a popular option for homes all around the nation. However, standard vinyl siding doesn’t come with any insulation. This could cause your home to lose energy efficiency through thermal bridging. Thermal bridging occurs when your uninsulated framing and sheathing leak heat to your uninsulated siding.

Insulated vinyl siding, on the other hand, has stiff EPS, or polystyrene insulation glued to the back of it. While it may not make a dramatic difference, the additional R-2.7 to R-2 insulation can help you save money on your heating and cooling bills.

Stability

Another great reason to choose insulated siding is the increased stability. Standard vinyl siding is very flexible and can be bent or rattle on windy days. The additional thickness of insulation keeps your siding firm. With professional installation, insulated vinyl offers a durable, uniform look to your exterior.

Of course, this additional stability and insulation does come at a price. This type of vinyl siding is typically more expensive than standard vinyl. Ask for price estimates from a local contractor to determine the exact amount of additional cost that’s involved when choosing this siding.

Choosing the Best Siding

Of course, there are many other types of siding that offer their own pros and cons. If you’re ready to replace your siding or looking to build a new building, contact a local contractor to determine the best siding for your area. You’ll be able to receive estimates on insulated vinyl siding, and discuss your options with a professional who understands the unique local weather patterns.

Metal roofing can cost more than other materials, but a metal roof can last for the lifetime of a structure with minimal maintenance. It is best to approach this method of roof replacement as an investment. If you are weighing the costs and benefits of a metal roof, you might consider whether the extended life and decrease in maintenance is worth a larger expenditure up front.

Start by considering the type of metal. Aluminum is one of the most affordable options, but you might also select copper, galvanized steel, stainless steel, or even traditional zinc. All of these options can be durable and long-lasting. If you would like a metal roof that is not laid out in sheets, you might consider metal shake, which can resemble wood, or metal roofing with another finish.

If you are concerned about the ecological impact of roof replacement, you may want to ask a professional roofer about a recyclable natural metal roof. When it comes to energy efficiency, most metal roofs can be substantially more efficient than conventional roofing. There is also substantially less waste involved given that it is unlikely that you will need to entirely replace a metal roof. This roofing material is not subject to break, burn, crack, curl, peel, rot, or warp. Upkeep can be as simple as brushing the roof down when debris collects. It is still a good idea to make sure that proper drainage is available to maintain the condition of any roofing material.

As you calculate the value of metal roofing, you might want to factor in the in the lengthy warranties that frequently accompany these roofing materials. You should be able to rely on a metal roof installed by roof replacement professionals. Depending on your existing roof, you may be able to have a metal roof installed over the original roof to further limit labor and lower the price.

Thinking of getting a new roof for the home, but not sure which material to go with because there are lots of options? Metal roofing is something that was once considered a roofing material for commercial properties simply because it was quite plain and simple. It wasn’t as aesthetically pleasing as some of the other material on the market, which is one of the reasons homeowners often selected those other options. However, many changes have been made over the past several years, and the metal roof materials are now a lot more stylish than ever before.

[Read more…]

Your home’s exterior siding’s main job is to insulate the whole home from the outside in. The combination of insulation and siding protects your home from the effects of the changing elements outside. Insulated siding strengthens the foundation of the home while protecting the interior.

 

[Read more…]

When it comes to roofing materials, you have many options, including slate, tile, clay and asphalt. One of the best options, however, is metal. Metal roofing comes with many benefits, including its light weight, easy installation and fire resistance. If you’re torn between the different roofing options, however, consider the top four reasons that most homeowners ultimately go with metal.

 

 

It’s Durable

The average roof lasts for ten to twenty years, which is not bad, but if you want to invest in a new roof that won’t have to be replaced again in your lifetime, go with metal. Because metal is water and heat resistant, it can last anywhere between 40 and 70 years. Though it is a little more expensive than other roofing materials, it’s durability and longevity make it a worthwhile investment.

 

It’s Energy Efficient  

In addition to being cost-friendly in the long term, metal roofs are also energy efficient. Metal roofing reflects the sun’s rays and prevents heat transfer, whereas typical asphalt roofs soak up the sun’s heat. If you want to reduce your carbon footprint and save on your future energy bills, consider having a metal roof installed.

 

It Sheds “Weight”

Most roofing materials hold onto snow, and asphalt shingles soak up moisture when it rains. This makes your roof heavier, and shortens its lifespan considerably. A metal roof, on the other hand, sheds that weight easily. Because metal is a naturally slippery surface, any snow, rain or debris will slide right off, ensuring that your roof isn’t unnecessarily weighed down.

 

It’s Lightweight

Some roofing materials, such as clay and tile, require additional structural support to be added to the home because they’re so heavy. However, because metal is so lightweight, it can be applied directly over an existing roof without adding too much weight to your home’s structure.

 

If you need to replace your roof soon, consider replacing it with metal. Metal roofing comes with many benefits, but it’s durability, energy efficiency, slippery surface and light weight are the top four.

The odds are that you chose your metal roof in the first place because it promises low maintenance and a durability like no other. However, that doesn’t mean that owning metal roofing is an entirely hands-off process. In fact, there are a few steps you’ll want to take throughout the coming months or years to ensure that your roof remains as durable and efficient as possible, and to make being a homeowner an easier process for you overall.

 

[Read more…]

There has been a significant increase in the popularity of metal roofs. This is due to significant benefits with metal roofing.

Longevity

The average lifespan of an asphalt shingle roof and other types of roofing may be 20 years. Metal roofs can last 40 to 70 years.

 

[Read more…]